Some Important Height Measurements To Pay Attention To
1.1. Clearance height
Clear height is the distance from the factory floor to the lowest point of the beam or roof:
The clear height of the factory ranges from 7-10 meters.
Directly affects the ability to move machinery, equipment, trucks, and goods in the factory.
The minimum clear height required depends on each type of industry.
1.2. Roof peak height
Roof top height is the distance from the factory floor to the highest point of the roof:
Roof peak height ranges from 9.8 – 14 meters
Affects drainage, ventilation, and factory capacity.
Needs to be designed in accordance with climatic conditions and aesthetic requirements of the project.
1.3. Door height
Door height is the distance from the factory floor to the bottom edge of the door:
It is necessary to ensure enough for trucks, forklifts, and workers to easily enter and exit the factory.
Need to match the size of machinery and equipment used in the factory.
1.4. Handrail height
Handrail height is the distance from the floor to the top edge of the handrail:
It is necessary to ensure safety for workers when working at height.
Minimum specified in labor safety standards.
1.5. Ventilation system height
Ventilation system height is the distance from the factory floor to the air inlet or exhaust door:
It is necessary to ensure good air circulation in the factory.
Needs to be consistent with the system’s capacity and the aesthetic requirements of the project.
